4:1 Adhesive Lined Wire Splices HST

Designed for automotive wire/metal splices, wire/wire joints, plays a function of insulation, water resistant and sealant

Product Code Cross References

·Raychem                : ES1000 / ES2000

·DSG Canusa           : DERAY-SPLICEMELT

·3M                          : TES.SMS

 

Wire Splices Heat Shrinkable Tubing

Voltage Class 1kV

Ideal for splice/joint protection in most automotive applications

Clear, high shrink ratio, adhesive-lined, semi-rigid polyolefin tubing specially designed for wire splice application in automotive market where longitudinal waterproof sealing is required.

Applications

·Insulation and waterproof for automotive wire-to-metal splices, and wire-to-wire joints

Features/Benefits

·High 4:1 shrink ratio to accommodate wide range of wire harness

·Flame retardant (black only)

·Abrasion resistant

·Hot melt thermoplastic adhesive with good fluidity when melt, effectively flows to and fills void to seal against water and moisture

Temperature Range

·Operating Temperature         : -55 ºC ~ 135 ºC

·Shrink Temperature              : 125 ºC

Colour:Black, Transparent

Product Code Cross References

·Raychem                : ES1000 / ES2000

·DSG Canusa           : DERAY-SPLICEMELT

·3M                          : TES.SMS

Technical Details

Test item	Test method	Typical value
Tensile strength	ASTM D2671	Black ≥14MPa; Transparent ≥12MPa
Breakdown elongation	ASTM D2671	Black ≥400%; Transparent ≥400%
Outer layer specific gravity	ASTM D792	Black 1.25; Transparent 1.0
Tensile strength after aging	ASTM D2671	Black ≥14MPa; Transparent ≥12MPa
Breakdown elongation after aging	ASTM D2671	Black ≥350%; Transparent ≥350%
Heat impact* (at 200/4h)	ASTM D2671	no drop no flow
Low temperature flexibility* (at -55/4h)	ASTM D2671	no cracking
Flammability	ASTM D2863	Oxygen Index ≥27
Volume Resistivity	ASTM D2671	≥ 1014Ω.cm
Dielectric strength	ASTM D2671	≥ 16kV/mm
Water absorption	ASTM D570	≤ 0.5%
Copper corrosion	ASTM D2671	pass

* Outer layer only

Product Selection

Product Code	Min. wall thickness  after free recovery(mm)	Standard Package (m/roll)
A1-Φ5.7/1.3	1.2	100
A1-Φ7.4/1.7	1.4	100
A1-φ10.8/2.5	2.0	100
A1-φ17.8/4.4	2.3	50

4:1 Adhesive Lined Wire Splices HST